Xypex Restora-Top Series

RESTORA-TOP 50

Description

Xypex Restora-Top 50 is one of three Xypex products specifically formulated for the repair and rehabilitation of horizontal concrete surfaces. Xypex Restora-Top 50 is used for the patching or resurfacing of deteriorated concrete up to 1/2 in. (12 mm) thick. It is used on surfaces where light traffic conditions exist. Xypex Restora-Top 50 consists of specially modified Portland cement, aggregates, admixtures and bonding agents combined in controlled proportions to provide excellent adhesion properties as well as reduced shrinkage.

Recommended for:

  • Concrete Floors
  • Driveways
  • Decks
  • Patios
  • Steps
  • Walkways
  • Curbs
  • Rain Damaged Slabs
  • Levelling Course for Thin Set Mortars

Advantages

  • Excellent adhesion to existing concrete surfaces
  • Easy to use - just add water and mix
  • Approximately 30 minutes working time
  • Contains an integral bonding agent
  • Moist curing is not normally required
  • Ready for foot traffic in about 2.5 hours
  • Suitable for indoor and outdoor use
  • VOC compliant

Limitations

Restora-Top 50 should not be mixed and placed at temperatures below 50°F (10°C) or above 80°F (27°C). Protection from direct sunlight is desirable under hot or windy conditions. Restora-Top 50 contains a polymer additive to enhance bond. To achieve maximum bond strength, the polymer must be allowed to dry out after the initial setting and curing period. Avoid immersion prior to full curing of Restora-Top 50.

Packaging

Xypex Restora-Top 50 is available in 55 lb. (25 kg) bags.

Storage

Xypex products must be stored dry at a minimum temperature of 45°F (7°C).

Coverage

At 1/4 in. (6.4 mm) thickness, each 55 lb. (25 kg) bag of Restora-Top 50 will cover 24.8 sq. ft. (2.4 m2). For brush or broom applications, the yield will vary with the thickness and texture required. Each 55 lb. (25 kg) bag will cover an area of approximately 105 - 115 sq. ft. (10 - 11 m2) for a brush or broom application.




RESTORA-TOP 100

Description

Xypex Restora-Top 100 is one of three Xypex products specifically formulated for the repair and rehabilitation of horizontal concrete surfaces. Xypex Restora-Top 100 is used for patches up to 1 in. (25 mm) thick where rapid setting and strength gain are required. Restora-Top 100 consists of specially modified Portland cement, aggregates, polypropylene fibers, and admixtures combined in controlled proportions. This compound provides excellent adhesion properties, rapid setting and strength gain as well as superior durability and reduced shrinkage.

Recommended for:

  • Concrete Floors
  • Parking Decks
  • Walkways
  • Warehouse Floors
  • Bridge Decks
  • Roads

Advantages

  • Excellent adhesion to existing concrete surfaces
  • Traffic-ready in two to four hours
  • Easy to use - just add water and mix
  • Rapid set and strength gain
  • Suitable for indoor and outdoor use
  • VOC compliant

Limitations

Restora-Top 100 should not be mixed and placed at temperatures below 37°F (3°C) or above 86°F (30°C). Protection from direct sunlight is desirable under hot or windy conditions. Use only as a patching or filling material.

Packaging

Xypex Restora-Top 100 is available in 55lh (25 kg) bags.

Storage

Xypex products must be stored dry at a minimum temperature of 45°F (l°C).

Coverage

At one inch (25 mm) thickness, each 55 lb. (25 kg) bag of Restora-Top 100 will cover approximately 5.7 sq. f1. (0.52 m2).




RESTORA-TOP 200

Description

Xypex Restora-Top 200 is one of three Xypex products specifically formulated for the repair and rehabilitation of horizontal concrete surfaces. Xypex Restora-Top 200 is recommended for patching requirements that exceed 1 in. (25 mm) thickness and where high impact resistance is required. Restora-Top 200 consists of specially modified Portland cement, fine aggregate gradations, 1.2 in. (30 mm) long steel fibers, and admixtures combined in controlled proportions. This compound provides excellent adhesion properties, rapid setting and strength gain as well as superior durability and reduced shrinkage.

Recommended for:

  • Concrete floors
  • Parking Decks
  • Walkways
  • Warehouse Floors
  • Bridge Decks
  • Roads

Advantages

  • Excellent adhesion to existing concrete surfaces
  • Traffic-ready in two to four hours
  • Increased toughness and impact resistance
  • Easy to use - just add water and mix
  • Rapid set and strength gain
  • Suitable for indoor and outdoor use
  • VOC compliant

Limitations

Restora-Top 200 should not be mixed and placed at temperatures below 37°F (3°C) or above 86°F (30°C). Protection from direct sunlight is desirable under hot or windy conditions. Use only as a patching or filling material.

Packaging

Xypex Restora-Top 200 is available in 55 lb. (25 kg) bags.

Storage

Xypex products must be stored dry at a minimum temperature of 45°F (7°C).

Coverage

At one inch (25 mm) thickness, each 55 lb. (25 kg) bag of Restora-Top 200 will cover approximately 5.7 sq. ft. (0.52 m2).


Xypex Restora-Top

For the complete product data sheets, click on any of the following links:

Xypex Restora-Top 50 Data Sheet
Xypex Restora-Top 100 Data Sheet
Xypex Restora-Top 200 Data Sheet